Hi Dear friends, In this article wapreals.com.ng sharing a complete tutorial on ‘How to Hard Reset your Xiaomi Redmi 3S or Redmi 3S Prime’. I think all of you have already a Redmi 3S/ 3S Prime and you want to Hard Reset it [or you want to flash the device]. Why I am sharing this article is because recently me too tried to hard reset Xiaomi redmi 3s prime device and faced lots of difficulties. I didn’t found a correct tutorial article. However finally I successfully Hard reset my Redmi 3S prime [ i flashed the Redmi 3S Prime with it’s original global ROM]. So I decided to share a complete article on how to hard reset Redmi 3s/ 3s prime including my experiences.
I told on above paragraph that i flashed my Redmi 3S Prime to original stock ROM[ hard reset]. Actually, it’s not mine, and it’s my friend’s device, and he forgets the password. He disabled the Finger Print Lock earlier, and he is unable to use the device after forgetting the pattern lock. so he wants to unlock the pattern lock of his Redmi 3S prime[ he want to break the lock]. He met me and told the things. I planned to hard reset the phone from phone bootloader[ by holding both power button+ volume up button]. But I can’t. The Redmi 3S prime device bootloader also got locked [bootloader is disabled]. So it is not possible to hard reset the device by this method. We need to flash the device. Yeah/, I googled ‘how to hard reset the Xiaomi Redmi 3S prime ‘ unfortunately I didn’t found any valid articles on google results. But there I got a youtube video which was posted by a guy named TECHY TECH. It is very useful, but the video misses some important things. Anyway, the video is very simple and helped me a lot. I followed the video and referred some other Xiaomi forums and finally solved all issues faced while hard resetting Redmi 3S prime.
You guys got bored? 😉 I think you guys are also landed here because of the similar issues [i mean, forget pattern lock of redmi 3s/prime]. The steps to Hard reset your Redmi 3s prime device is written below. After the steps section you can see the FAQ section where I answered the questions [issues] related to the topic ‘how to hard reset/ flash Redmi 3S/ Redmi 3S Prime.
How to Unlock my Xiaomi Redmi 3S/Prime if I forget the password/pattern lock
Requirements to hard reset Redmi 3s/Prime
- Windows PC. Windows 10 Recommended
- Redmi 3s/Prime device with Micro USB data cable
- Xiaomi Mi Flash App [click here to dwonload]
- ROM [click here to download].
Steps: How to hard reset Xiaomi Redmi 3S/ Redmi 3S prime.
- So now you are not able to open the device. Means, your device locked and you forget the pattern lock. You want to hard reset it. here is the link to the youtube video which I said above. I recommend you to watch it for more clarifications. the video is not in-depth, so first, read the steps given here.
- Before going to the steps, make sure that you are downloaded the files said in requirements.
- Switch off your device now.
- Hold both the power button and volume+ button for some seconds. An MI logo will appear after that you will see an another screen. There you need to select the ‘download’ option.
- after pressing the ‘download’ option, your device screen will become blank. this means your device is now on EDL mode. Note this step; this is very important.
- After that, connect the device to your computer with USB cable.
Now right click on computer>>Properties>> Now a new window will get opened>> then click on device manager [at the left top corner].
From the device manager select PORTS. There you can see ‘QUALCOMM HS-USB QDLOADER 9008’. If you see this, then your device is ready to flash.
- Now extract the downloaded files. After that install XiaomiMiFlash Tool on your computer. So now you have ROM [extracted from downloads and Mi Flash tool app]
- Open MiFlash tool then click on Refresh. Your device will be listed there. then click on the Select button and browse to the extracted ROM folder. [ select the ROM folder and click OK].
- Then click refresh button once again. then at the right bottom corner you can see a options menu [a blank column; click there]. select flash_all_except_data_storage there.
- Then click on the flash button. It takes some time. After getting the success message, remove your device from computer and turn on your device.
Boom, your device is unlocked. Enjoy the device. You won’t lose your warranty by following these steps. So don’t worry about it.
FAQ: Xiaomi Redmi 3S/Prime hard Reset [ flash Redmi 3s/Prime]
1.After clicking the ‘Download’ button, the device restarts normally. What will I do now?
ANS: Me too faced the same issue. After clicking the download option [step no.5] my device restarted normally. The device is not going to EDL mode. And it is compulsory to boot to EDL mode to continue further steps. So how to get my device into EDL mode?
There are some methods to put your device into EDL mode. The method I followed is like this:
First take one another Micro USB cable [don’t use your original Xiaomi Micro USB cable]. Then cut off it’s plastic cover, and you can see some coloured wires there. Pick the green and black wires.Now take a needle and pierce through the green and black wires. So there will be a contact between green and black wires. Make sure that there is a connection[contact] between the two wires.
Now switch off your device and connect the new altered Micro USB cable to PC and plug the other end [end which connects to the phone] to your phone. Now wait for 15 seconds[you won’t see anything]. After counting 15, pull away the micro USB cable from the device. Congrats, Now your phone is booted into ‘download’ mode.
Now take the original Xiaomi micro USB cable and connect to the PC and device. After that continue from the steps from step no.6.
This is worked fine for me. If you have any doubts in this steps, you can check this video which explaining this method[ booting device to EDL mode with altered micro USB cable]. If this method didn’t work for you then you can also check some other methods to boot your device into EDL mode.
2. I am getting an error “cannot receive hello packet” on Xiaomi Mi flash tool. What should I do now?
ANS: just uninstall and again install the mi flash tool app then after selecting the ROM’s folder select the ‘flash_all_except_data_storage’ option. You are getting above ‘hello packet error’ because you are not selecting this. So it is compulsory. Check the screenshot provided to verify. After selecting the option do flash.
I hope this article helped you in hard resetting your Xiaomi redmi 3s/ prime. I personally tested the above methods and successfully hard reset my Xiaomi redmi 3s prime. In my case redmi 3s prime was locked and forget the pattern lock hence unable to unlock. So this method worked me to unlock my redmi 3s prime through flashing the orignal ROM [hard resetting]. If you have any doubts or queries regarding this just comment below i will help you to hard reset your redmi 3s/3s prime successfully.